Sick Safety Locking Unit, FlexLock, FXL1-SPBUSA00

Sick Safety Locking Unit, FlexLock, FXL1-SPBUSA00

14 Units for sale

flexLock

• RFID-monitored safety locking device with 180° actuation radius
• Innovative design: Open locking head with 180° actuation radius, rounded housing, bright LEDs (visible from three sides)
• PL e for door and locking monitoring with low or high coding
• IP67 and IP69K enclosure rating
• High locking force: Up to 3150 N
• Flexible actuator for high offset tolerance

• Features

  Sensor principle	RFID
  Locking principle	Power to release
  Coding	Uniquely coded
  Locking force Fmax   Flexible actuator 4,100 N (EN ISO 14119) Rigid actuator (frontal) 3,630 N (EN ISO 14119) Rigid actuator (lateral) 3,510 N (EN ISO 14119)
  Locking force FZh   Flexible actuator 3,150 N (EN ISO 14119) Rigid actuator (frontal) 2,790 N (EN ISO 14119) Rigid actuator (lateral) 2,700 N (EN ISO 14119)
  Actuation force	20 N
  Retaining force	30 N
  Force against which unlocking is possible	≤ 25 N
  Actuation frequency	≤ 1 Hz
  Approach speed	≤ 20 m/min

• Safety-related parameters

  Safety integrity level	SIL3 (IEC 61508)
  Category	Category 4 (EN ISO 13849) 1)
  Performance level	PL e (EN ISO 13849) 1)
  PFHD (mean probability of a dangerous failure per hour)	6.79 x 10-9 2)
  TM (mission time)	20 years (EN ISO 13849)
  Type	Type 4 (EN ISO 14119)
  Actuator coding level	High coding level (EN ISO 14119)
  Safe state in the event of a fault	At least one safety-related semiconductor output (OSSD) is in the OFF state.

  • 1) Applies for monitoring of the door position (interlocking monitoring) and locking monitoring.
  • 2) At 40 °C and 0 m above sea level.

• Functions

  Auxiliary release	✔
  Switching behavior of the OSSDs	Locking monitoring
  Safe series connection	In control cabinet (with diagnostics) With Flexi Loop (with diagnostics) With T-connector (without diagnostics)

• Interfaces

  Connection type Plug connector, M12, 8-pin Coupling nut material Stainless steel
  Diagnostics indicator	✔
  Status display	✔

• Electrical data

  Protection class	III (IEC 61140)
  Contamination rating	3 (IEC 60947-1)
  Classification according to cULus	Class 2
  Usage category	DC-13 (IEC 60947-5-3)
  Rated insulation voltage Ui	32 V
  Rated impulse withstand voltage Uimp	1,500 V
  Supply voltage VS	24 V DC (19.2 V DC ... 28.8 V DC)
  Power consumption   Locking device unlocked 65 mA Locking device locked 65 mA
  Peak current	800 mA, 200 ms
  Type of output Self-monitoring semiconductor outputs (OSSDs) Safety outputs 2 PNP semiconductors, short-circuit protected, cross-circuit monitored
  Output current   Safety outputs ≤ 100 mA Application diagnostic outputs ≤ 50 mA
  Output voltage	UV - 2 V DC ... UV
  Response time	≤ 150 ms 1)
  Release time	≤ 350 ms 1)
  Risk time	150 ms 1)
  Switch-on time	3 s
  Locking principle	Power to release

  • 1) In safe series connection: The value increases by 70 ms with each additional switch.

• Mechanical data

  Weight	480 g
  Material   Housing VISTAL® Ball bracket Stainless steel Latch plate of the actuator Stainless steel Plug connectors Stainless steel
  Mechanical life	1 x 106 switching cycles

• Ambient data

  Enclosure rating	IP65 (IEC 60529) IP67 (IEC 60529) IP69K (IEC 20653)
  Ambient operating temperature	–20 °C ... +55 °C
  Storage temperature	–25 °C ... +70 °C
  Relative humidity	10 % ... 95 %, at 40 °C (IEC 60068)
  Vibration resistance	10 Hz ... 55 Hz, 1 mm (IEC 60068-2-6)
  Shock resistance	30 g, 11 ms (EN 60068-2-27)
  EMC	EN IEC 61326-3-1 EN IEC 60947-5-2 EN IEC 60947-5-3 EN 300330