AGS

If the component is ferromagnetic, it can be easily handled with magnetic grippers MGR. Handling weight per gripper from 200g - 3000g. ES there are electrically or pneumatically driven versions. Via the prism directly on the body, the unit can be attached to PreciGrip profiles.More Info www.ags..

If inserts or bushings, rings or screws have to be picked up precisely, PAG impact grippers are used. A distinction is made here between different sizes, number of gripper fingers and stroke sizes. The adaptation options from the modular system are also used optimally here, both in the gripping dire..

The presence of components in the gripper is monitored with the AGS part controls TEK. They are mostly used when no monitoring with a vacuum suction cup (vacuum switch) can take place. For the part controls there are a lot of accessories in the program, mounting material, cables, plugs and distribut..

The suction pad (vacuum cup) SG is the simplest and most cost-effective way to handle a component. There are various designs, materials and sizes. It can be attached directly to the profile, rigid, twistable, spring-loaded and via a lifting unit.More Info www.ags-shop.de..

Soft components (textiles, show fabrics, insulating materials, woven fabrics, SMC (Sheet Molding Compound), etc.) are gripped with NAG needle grippers. These are all pneumatically driven. There are variants with double stroke which means that the needle can make 2 different long movements. A combina..

Textiles or flexible parts, such as textiles, foams, SMC (Sheet Molding Compound), nonwovens are handled with needle grippers NAG. 4 to 32 needles can be used. The penetration depth of the needles can always be easily adjusted. The connection is made via a prism on the body of the needle gripper. ..

The GZA grippers are primarily used to grip the sprue. There are different types of grippers available. However, the component can also be gripped with the gripper. The gripper can be a good alternative to parallel grippers.More Info www.ags-shop.de..